Services Performed
- When we entered the vehicle it started and ran, noted the Check Engine Light was on. Scanned for codes and received P00C6 (fuel rail pressure), P025A (fuel pump module A circuit), P06E9 (engine starter performance), U0109 (communication with fuel pump control module), P0702 (transmission control system), U3003 (battery voltage), U0952 (invalid data), U0151 (communication restraint control module), B110A (rear door locking motor), B1C37 (master lock switch circuit shorted to ground), B10C0 (fuel pump power supply shorted to ground), B10E7-12 (injection relay shorted to ground). Vehicle ran properly in the shop for about 15 minutes then died. When tested we had a loss of continuity thru the main wiring harness. We disassembled the passenger side of the vehicle to access the wiring harness and found where there had been water intrusion and damage to the harness with exposed wiring (picture provided to customer). We repaired the individual wires in the harness using heat shrink to seal. Added protection the harness and reassembled. Cleared codes and ran the vehicle – ran in the shop for an hour. Test drove without incident – vehicle ran properly and no codes reset. .
Rebecca M. gave our service a 5 star review on 1/25/2023